SpottyTM - About | SpottyTM

ABOUT THE HOLE COVER

Using a post pounder to drive in the t-posts, surrounding the posts with snow fence, and placing plywood/sand bags and warning signs takes effort and time for a crew. This process takes drastically longer in winter conditions with more effort installing in frozen ground. Each time the crew needs to work around the spot hole, there is a lot of time spent on setup, use, and tear down. Once the work is complete, the snow fence is cut off/removed and the t-posts are pulled out of the ground. This usually leaves the crew with bent t-posts and snow fence pieces that get thrown away.

The two part storable hole cover was designed to make the protection of utility spot holes easier and safer - saving you time and money!

HOLE COVER

TRADITIONAL INSTALL

The hole cover eliminates time intensive and repetitive work as well as waste from the job site. A single person can quickly deploy the cover on to the hole, pin down the base (where required), and secure the top marker in place within minutes. Tear down being done just as quickly. The entire setup is reusable and the hole covers stack on top of another to neatly transport and stow away.

YOUR ADVANTAGES

See why it is the right choice.

Time and money are saved by reducing labour costs with each deployment and re-use. The hole cover pays for itself in savings over a few uses. When compared to traditional installations with snow fence, t-posts, plywood, and signage; the hole cover provides an estimated +80% labour savings per deployment.*

Being made of durable materials allow the cover to be re-used over and over. The HDPE materials can also be recycled at end of use; lowering the carbon footprint and making for more sustainable operations.

YOUR SAVINGS

FREQUENTLY ASKED QUESTIONS

What is ?

is a safety device for covering holes, primarily designed for the underground utility construction industry. Spotty reduces costs and labor efforts while enhancing worker safety. Cutting labour efforts up to +80%!*

How does work?

Simply place the Hole Cover Base over the hole and secure it (as required). Pin the Marker Top to the Base for extra visibility.

What are the benefits of ?

saves time and cost. It minimizes safety risks, is reusable, recyclable, and visually appealing. It provides effective protection for holes up to 16 inches in diameter.

Is made in Canada?

Yes, is proudly designed, manufactured and operated in Canada.

What materials are used?

The hole cover base is made from durable HDPE materials designed for safety and longevity. The Marker Top is a rugged plastic post made of polypropylene.